Contact Us
- HuZhen Town CangLing Road No, 288 Qlke SemiconductorTwo industrial parks Junyun Zhejiang, China
- charliecai@vchon.com.cn
- +8619957875285

3D/4D Laser Level With Auto Self-Leveling
3D/4D self-leveling laser level delivers 1mm ultra-precise lines with near-zero error. It supports auto leveling and tilt line mode, 360°multi-plane marking, 72h long standby, remote & touch control, 6mm wall /16mm floor close fit, sunlight visibility, waterproof shockproof build and tilt alarm, ideal for tiling and construction layout.
Description
Product Information
This 3D 4D cross line laser level is an all-in-one digital layout tool for construction and tiling work. It delivers ultra-precise 1mm laser lines with nearly zero error, equipped with high-brightness imported laser diodes and adjustable brightness to fit indoor and outdoor scenes. It supports 360° horizontal & vertical cross laser projection, offers full coverage multi-plane marking. Boasting up to 72h super long standby, it works steadily for long-time site operation. Great for renovation, tile installation, framing and alignment jobs.


Visible in Bright Sunlight
Strong laser beam delivers clear visibility even under bright sunlight, works perfectly both indoors and outdoors for construction layout.

LED Digital Display & Large Capacity Battery
High-definition digital screen shows power clearly. Large lithium battery supports long-time continuous working, easy to charge.

Auto Leveling ≤ 3°& Alarm System ≥ 3°
It self-levels within ±3°. Will trigger buzzer alarm once out of leveling range to remind you in time.

IP54, Multi-Protection, Durable Build
IP54 waterproof, dustproof and shockproof design. Fully sealed housing protects the laser for long service life.

Smart Remote Control, Adjustable Laser Line
Adjust laser line thickness remotely. Long press H/V keys to thicken or thin lines, convenient for various construction tasks.

6mm Wall Fit & 16mm Floor Fit
Ultra-narrow gap design. Fits close to wall & floor, supports multi-angle operation for tiling and decoration marking.


Laser Wavelength: 635nm for laser lines & horizontal lines; 650nm for down point.
Self-leveling Range: ±3°
Laser Class: Class II
Operating Temperature: -10℃ ~ +45℃
Laser Accuracy: ±1mm at 8m
Power Supply: Lithium battery
Protection Class: IP54, dustproof & waterproof
Low Voltage Alert: Power indicator light flashes or laser lines blink

Product parameters
|
Parameter Item |
Specification Details |
|
Product Name |
green Laser Level 8/12/16 Line |
|
Wall-Following Distance |
6 mm |
|
Upgrade 1 |
Ultra-Bright LD Green Laser |
|
Floor-Following Distance |
16 mm |
|
Working Accuracy |
±1 mm/7 m |
|
Upgrade 3 |
Adjustable Line Thickness |
|
Operating Temperature |
-10°C ~ +45°C |
|
Working Time |
6-8 Hours |
|
Outdoor Visibility |
8-15 m |
|
Tilted Line Function |
✔ (Supported) |
|
Self-Leveling ±3° |
✔ (Supported) |
|
Remote Control |
✔ (Supported) |
Quality control
Every Green Laser Level Toolstation undergoes strict quality control:
Incoming inspection – All core components including laser diodes, pendulum assemblies and batteries get tested prior to assembly.
In‑process checks –Real-time monitoring of leveling accuracy (±1mm/5m) and laser beam alignment
100% final test – Every machine is inspected for laser brightness, remote control distance, battery endurance and digital display performance.
Batch sampling – Randomly selected products undergo temperature resistance testing (-10℃ to +50℃) and anti-vibration tests.
Pre‑shipment audit – Complete inspection of all supporting accessories and packaging before shipment.
All procedures follow ISO 9001 standards with full traceability.
Real Cooperation Cases

Why choose our green laser level toolstation
We have years of professional experience in precision optics and mechanical manufacturing, strictly controlling every production process from core optical component assembly to final calibration. This ensures excellent quality, competitive pricing, and reliable performance.
We offer multiple models of laser projectors to meet different application needs - whether you need crosshairs, multi lines, or full 360 ° horizontal and vertical projection. Our product design emphasizes multifunctionality and precision.
In addition, we can customize colors according to your needs, giving the product personalized features while ensuring quality.
By utilizing our comprehensive OEM and ODM service capabilities, we can tailor laser wire projectors to meet your specific needs. Whether you need a unique combination of features, specific precision levels, or customized packaging, our engineering team can turn your ideas into reality.
our service
1. We offer comprehensive OEM services with extensive experience in custom manufacturing.
2. We can customize specific hardware components according to client requirements.
3. We provide technical support and guidance for product assembly.
4. Multiple models are available with fast delivery times.
5. We maintain a well-established sales network to ensure efficient service.
6. Advanced production equipment and technology guarantee high-quality products.
7. In addition to premium customer service, we offer competitive factory-direct pricing.
8. Custom designs can be developed based on client specifications.
9. Strict quality inspection procedures are implemented, with 100% testing of critical components.
Product Tutorials, Troubleshooting & Technical Support
Green Laser Level ToolStation User Guide
Step 1: Installation and Preparation
1.Battery Installation: Open the battery compartment on the side of the device, insert the provided high-capacity lithium battery pack, ensure correct polarity, and securely close the compartment cover.
2.Device Placement: Choose one of the following methods to fix the device:
Use the wall-mounted auxiliary steel plate: First fix the plate to the wall, then quickly attach the device via magnetic adsorption.
Use a tripod: Install the device onto a tripod using the standard threaded hole at the bottom.
Place directly on a stable table or floor surface.
Step 2: Power On and Initial Setup
1.Start the Device: Press the power button. The Green Laser Level ToolStation will emit a prompt tone, and the laser module will activate.
2.Wait for Self-Leveling: The built-in pendulum system will automatically perform preliminary leveling within a ±4° range. The laser lines will stop flashing once leveling is complete.
Step 3: Precise Adjustment and Usage
Height Adjustment
Coarse Adjustment: Manually adjust the freely adjustable lifting platform to the desired height range.
Fine Adjustment: Slowly rotate the lifting platform knob for millimeter-level precision height adjustments.
Angle Fine-Tuning
Use the two fine-tuning knobs for precise calibration in horizontal and vertical directions.
Laser Projection
The device projects complete horizontal planes through the 360° horizontal laser ports (top and bottom).Vertical laser lines are projected through the 360° vertical laser port.A full-coverage spatial coordinate reference system is formed.
Step 4: Function Operations
Mode Switching
Short-press the power button to switch between different laser line modes.
Remote Operation
Some models support remote control operation with a range of up to 30 meters.
Battery Monitoring
The device indicator shows the remaining power of the high-capacity lithium battery and automatically alerts when battery is low.
Step 5: Post-Use Operations
Power Off
Long-press the power button for 3 seconds to turn off the device.
Cleaning and Maintenance
Use a soft, dry cloth to clean the laser window surface.
Storage Requirements
Lower the lifting platform to its lowest position.
Remove the battery for separate storage (if not used for an extended period).
Place the device in the dedicated protective case and store in a dry environment.
Precautions
1.Avoid direct laser exposure to the eyes; wear protective goggles during use.
2.Avoid severe shocks or moving the device during operation.
3.Regularly check the flexibility and stability of all adjustment components.
4.Use within an ambient temperature range of 10°C to 50°C.
5.If accuracy deviations are observed, send the device for professional calibration promptly.
Troubleshooting
1.Laser lines not lighting up: Check battery power and installation direction.
2.Auto-leveling abnormal: Ensure the device is placed on a stable surface.
3.Accuracy deviation: Send to the factory for professional calibration.
Troubleshooting (Common Issue Solutions)
|
Normal Situation |
Adjust the height of the laser level 12 line to improve light visibility |
Solution / Troubleshooting Steps |
|
Unable to distinguish blue/green light |
Explain blue/green light characteristics, offer compensation or price refund |
Press the H/V buttons to adjust the light, restart the device, ensure the battery is fully charged, or request a replacement if issues persist. |
|
No response when powering on/off |
Battery dead or not installed properly |
Check power switch issue |
|
Cannot distinguish between blue-green light |
Faulty power switch or not pushed into place |
Fully charge battery |
|
No response when powering on/off |
No power between battery and laser level |
Try different charger, check charging, refer to operation video, or request replacement |
|
Power switch too stiff |
Switch not properly engaged |
Compensate for switch issue |
Packaging and Shipping


Manufacturing Strength
Introduction to the Factory Strength of Weichuang Electronics Co., Ltd. in Jinyun County
Jinyun Weichuang Electronics Co., Ltd. is located in Jinyun County, Zhejiang Province. It is a modern high-tech enterprise that integrates research and development, production, and sales. Since its establishment, the company has always focused on the manufacturing of precision measuring tools and intelligent laser instruments. Its strong factory strength is the core cornerstone that supports excellent product quality and market competitiveness.
Advanced and complete manufacturing hardware
The factory is equipped with industry-leading automated production lines, high-precision CNC machining centers, and advanced injection molding equipment, ensuring that the production of core components to external structural components can be independently completed, achieving full process control of product quality. For example, the metal components used in the product, such as wall mounted auxiliary steel plates and free lifting platforms, are all precision machined in our own CNC workshop to ensure their strength and accuracy; The production and assembly of precision electronic components such as touch control panels are completed in dust-free and anti-static workshops, ensuring the reliability and durability of the products.
Exquisite and rigorous craftsmanship and technology
Our technical team has strong capabilities in independent research and customization (OEM/ODM). Whether it is the precise thread design of the up and down fine adjustment knobs, the front and rear fine adjustment knobs, or the smooth feel of the lifting table fine adjustment knob, they all reflect our ultimate pursuit of process details. We can not only customize special hardware according to customer needs, but also provide a full process technical service system from product design, mold development to complete machine assembly, ensuring that every product meets strict process standards.
Scientific and rigorous quality control system
Quality is the lifeline of an enterprise. The factory has established a quality testing center that far exceeds industry standards, equipped with advanced quality testing equipment such as multiple laser rangefinders, angle calibrators, and environmental simulation test boxes. Every factory produced product must undergo 100% full inspection for its 360 ° horizontal laser precision, battery life, and the operational feel of all mechanical structures to ensure zero defects in the products delivered to customers.
Efficient and flexible supply chain and delivery capabilities
Relying on advanced production equipment and scientific supply chain management, we have strong production capacity and rapid market response capability. The procurement of raw materials, production scheduling, and inventory management have all been systematically operated, enabling diverse and fast delivery to fully meet the order needs of domestic and foreign customers.
In summary, Jinyun Weichuang Electronics Co., Ltd. has built a strong comprehensive factory strength with its strong hardware facilities, exquisite technical processes, strict quality control, and efficient operational management, laying a solid foundation for us to provide cost-effective and high-quality intelligent laser products to the global market.

FAQ
Q: What is the production lead time for this product?
A: The standard sample production period is typically 15-20 working days. For bulk orders (from MOQ to a 40-foot container), the production cycle is approximately 30-45 days. The exact duration may vary based on order quantity, process complexity, and current production schedule. Please contact us for an accurate delivery timeline.
Q: How do you ensure product quality?
A: We have established long-term partnerships with multiple world-class enterprises, and our products undergo rigorous quality inspection processes. Each level must pass 360° horizontal laser accuracy calibration, touch control panel functionality testing, mechanical structure durability testing, and lithium battery safety testing before leaving the factory. We implement 100% full inspection to ensure reliable and stable product quality.
Q: What performance tests and certifications do the products offer?
A: We provide multiple test reports, including:
Environmental adaptability tests (high/low temperature, humidity)
Mechanical performance tests: drop test, vibration test, knob durability test
Laser accuracy calibration certification (compliant with relevant national/regional standards)
Electronic safety certifications (CE, FCC, RoHS)
Q: Do you have products in stock? Can you provide samples?
A: All our products are made-to-order, with no ready stock available. Samples can be customized. Please consult our sales team for specific sample delivery times and costs.
Q: What is the Minimum Order Quantity (MOQ)? Can different models be mixed in one shipment?
A: The MOQ for standard products is XXX units (negotiable based on client requirements). We support mixing different models in one shipment, but the quantity of each model must not fall below its individual MOQ requirement.
Q: How does your factory implement quality control?
A: Quality is our top priority. We implement end-to-end quality management, from raw material intake to production processes and final products. Each level is fully assembled, functionally tested, and precision-calibrated before packaging to ensure it meets factory standards.
Q: What warranty terms do the products come with?
A: We provide a XX-month warranty for the entire machine (subject to specific contract terms). The warranty covers defects in materials and manufacturing processes, with core components such as laser modules enjoying extended warranty services. For details, please contact us for the latest warranty policy.
Hot Tags: 3d/4d laser level with auto self-leveling, China 3d/4d laser level with auto self-leveling manufactures, suppliers, factory, 4d Laser Level 16 Line, Electronic Laser Level, laser distance finder, Laser Level 12 Line, laser spirit level with tripod, self levelling laser spirit level
You Might Also Like











